Roll-In table Press 300 Ton

Roll-In Table Press

RTP-100

RTP-150

RTP-200

RTP-250

RTP-300

Other Hydraulic Presses

H Frame Press

Roll-In Table Press

Broach Press

H Frame / Broach Press

C Frame Press

Gantry Straightening Press

4 Post Press

Straightening Press

Press Brake

Forklift Tire Press

Roll-In Table Press / Broach Press

Specialty Hydraulic Presses

click on picture to enlarge

Standard features

Roll-in Table Hydraulic Press 300 Tons manufactured by RK Machinery

Roll-in Table Press 300 ton with full powered 4 axis control.

A totally new innovative design features simple fingertip control and provides for incredibly smooth movement on all 4 axis.

Superior ease of use and workmanship sets it apart as the best product offering in its class.

Powered moveable workhead for off-center work allows operator to position the cylinder from left to right with the touch of a lever.

Roll-in Table Press Powered by a 4 axis control for this 300 ton

All powered 4 axis are fingertip controlled.

Pressure regulator to limit the ram pressure.

Roll-in table on the 300 Ton H Frame press

Incredibly smooth 33 inch table travel.

Self-locking table design for this 300 ton roll-in table press

Self-locking table design eliminates lateral movement. Standard feature on all Roll-In Table Press models. The more pressure that you apply to the workpiece, the more rigid the header and frame become.

We manufacture this 300 ton roll in table press with quality Baldor motor

Electric / Hydraulic operation provides smooth, consistent pressing action.

Quality Baldor motor, low speed.

Low speed pump - quiet, dependable operation.

High capacity 20 GAL. hydraulic oil reservoir.

All hydraulic and mechanical parts are standard in the industry, and available throughout North America.

Open sides to facilitate work on long pieces.

Table can be moved in and out.

Flat ram nose can be easily changed to allow the user to adapt the press to a specific job.

Options available

Stop / Start c/w emergency stop button, wired direct to motor. Model may vary depending on the voltage.

Pressing plate for a Hydraulic press. Table is precision milled.

Hydraulic speed control. This is used regulate the speed of the Ram. From fast to very slow.

Front safety guard for operator protection. Safety guard can be removed within a few seconds if necessary.

Operation of the safety kit: When any of the four guards are opened, the press will automatically go to jog mode "low pressure", unless the operator turns the key to the “on” position which will enable the operator to use the press at full pressure with the guards open.

Foot pedal-electric solenoid valve for hands-free operation, c/w electric control panel

Handheld wireless remote control with variable speed on all axis, permits the operator to move freely around the press.

Request More Information and
Where to purchase

Name:
Email:
Phone:
Company:

Message: