Standard features
Powered moveable workhead for off-center work allows operator to position the cylinder from left to right with the touch of a lever.
All powered 4 axis are fingertip controlled.
Pressure regulator to limit the ram pressure.
Incredibly smooth 33 inch table travel.
Self-locking table design eliminates lateral movement. Standard feature on all Roll-In Table Press models. The more pressure that you apply to the workpiece, the more rigid the header and frame become.
Electric / Hydraulic operation provides smooth, consistent pressing action.
Quality Baldor motor, low speed.
Low speed pump - quiet, dependable operation.
High capacity 20 GAL. hydraulic oil reservoir.
All hydraulic and mechanical parts are standard in the industry, and available throughout North America.
Open sides to facilitate work on long pieces.
Table can be moved in and out.
Flat ram nose can be easily changed to allow the user to adapt the press to a specific job.
Options available
Stop / Start c/w emergency stop button, wired direct to motor. Model may vary depending on the voltage.
Pressing plate for a Hydraulic press. Table is precision milled.
Hydraulic speed control. This is used regulate the speed of the Ram. From fast to very slow.
Front safety guard for operator protection. Safety guard can be removed within a few seconds if necessary.
Adjustable stroke control c/w foot pedal-electric solenoid valve, speed control and electric control panel.
Operation of the safety kit: When any of the four guards are opened, the press will automatically go to jog mode "low pressure", unless the operator turns the key to the “on” position which will enable the operator to use the press at full pressure with the guards open.
Foot pedal-electric solenoid valve for hands-free operation, c/w electric control panel
Handheld wireless remote control with variable speed on all axis, permits the operator to move freely around the press.
Français
click on picture to enlarge
