Standard features
Cylinder activation is fingertip controlled, the more the hand lever is engaged the more
the ram movement is accelerated. This allows the operator to control the proper speed for the task.
Not shown
Front safety guard for operator protection (optional).
Safety guard can be removed within a few seconds if necessary.
Low pressure hydraulic system maintains lower oil temperatures, resulting in higher efficiency and safer operation.
We use large bore cylinders averaging 3,800 P.S.I. maximum pressure throughout our complete line of H Frame Presses. Most other manufactures use small bore cylinders
at 700 bar equal to 10,152 P.S.I. operating pressure.
At RK Machinery operator safety is our number one concern.
16" Ram travel allows the operator to do jobs requiring a longer stroke like broaching.
Cylinder activation is fingertip controlled, the more the hand lever is engaged the more
the ram movement is accelerated. This allows the operator to control the proper speed for the task.
Hydraulic power-lift for vertical displacement of table.
Cylinder activation is fingertip controlled, the more the hand lever is engaged the more the ram movement is accelerated. This allows the operator to control the proper speed for the task.
Pressure regulator to limit the ram pressure (optional).
Self-locking table design eliminates lateral movement.
Standard feature on all H Frame Press models.
The more pressure that you apply to the work piece, the more rigid the table and frame become.
Open sides to facilitate work on long pieces.
Double-acting cylinder permits pulling as well as pressing ram action.
Flat ram nose can be easily changed to allow the user to adapt the press to a specific job.
Electric / Hydraulic operation provides smooth, consistent pressing action.
Quality Baldor motor, low speed.
Low speed pump - quiet, dependable operation.
High capacity 10 GAL. hydraulic oil reservoir.
Power pack conveniently placed out of the way on all models.
All hydraulic and mechanical parts are standard in the industry, and available throughout North America.
Flat ram nose can be easily changed to allow the user to adapt the press to a specific job.
Options available
Stop / Start c/w emergency stop button, wired direct to motor. Model may vary depending on the voltage.
Pressing plate for a Hydraulic press. Table is precision milled.
Hydraulic Press V Blocks, matched pair.
Hydraulic speed control. This is used regulate the speed of the Ram. From fast to very slow.
Hydraulic pressure regulator is used to control the amount of pressing force.
Front safety guard for operator protection. Safety guard can be removed within a few seconds if necessary.
Adjustable stroke control c/w foot pedal-electric solenoid valve, speed control and electric control panel.
Operation of the safety kit: When any of the four guards are opened, the press will automatically go to jog mode "low pressure", unless the operator turns the key to the “on” position which will enable the operator to use the press at full pressure with the guards open.
Industrial side lights for better visibility.
Foot pedal-electric solenoid valve for hands-free operation, c/w electric control panel
Handheld wireless remote control with variable speed on all axis, permits the operator to move freely around the press.
Français
click on picture to enlarge
