150 ton H-frame press in combination with 20 ton Broach press.

20 inch stroke suitable for broaching & other applications.

Work tables are independent of each other.

All hydraulic and mechanical parts are standard in the industry, and available throughout North America.

Powered movable workhead for off-center work allows operator to position the cylinder from left to right with the touch of a lever.

All powered 3 axis are fingertip controlled.

Pressure regulator to limit the ram pressure.

Stop / Start c/w emergency stop button, wired direct to motor. Model may vary depending on the voltage.

Pressing plate for a Hydraulic press. Table is precision milled.

Hydraulic Press V Blocks, matched pair.

Hydraulic speed control. This is used regulate the speed of the Ram. From fast to very slow.

Front safety guard for operator protection. Safety guard can be removed within a few seconds if necessary.

Operation of the safety kit: When any of the four guards are opened, the press will automatically go to jog mode "low pressure", unless the operator turns the key to the “on” position which will enable the operator to use the press at full pressure with the guards open.

Industrial side lights for better visibility.

Foot pedal-electric solenoid valve for hands-free operation, c/w electric control panel